Fit-Out Solutions
We provide fit-out solutions for commercial, industrial and modular spaces, bringing together interior finishes, partitions, flooring, ceilings and coordinated building services to create practical environments suited to their intended use.
From workspace interiors to technical and site facilities, each fit-out is developed around the approved layout, operating requirements, material specifications and project scope.
01 / Overview
A successful fit-out brings the interior layout, finishes and building services together as one coordinated space. Our fit-out solutions are planned around the activities taking place inside, the available floor area, access requirements and the technical needs of the project.
Whether the requirement is an office, meeting room, industrial workspace or modular accommodation unit, the proposed materials and systems are selected against the approved project specifications.
Our approach: Practical layouts · Appropriate materials · Coordinated services · Defined project requirements
02 / Our Fit-Out Capabilities
01Interior partition systems help define work areas, meeting rooms and service spaces while maintaining the required access, privacy and visibility.
Typical options: gypsum-board partitions, glazed partitions, modular panel systems and associated doors.
Material thickness, acoustic performance, fire rating and glazing specification are selected according to the approved design.
02Ceiling and wall finishes are selected to suit the appearance, maintenance needs and operating conditions of the space.
Typical options: suspended ceilings, gypsum-board ceilings, acoustic ceiling systems and decorative wall finishes.
Ceiling loading, access panels, moisture resistance and fire-performance requirements must be checked for the selected assembly.
03Flooring is selected according to foot traffic, equipment loads, cleaning requirements and the intended use of the room.
Typical options: vinyl flooring, carpet tiles, ceramic tiles, epoxy coatings and industrial floor finishes.
Slip resistance, substrate condition, chemical resistance and permissible loading must be verified for each proposed flooring system.
04Fit-out work is coordinated with the required electrical, lighting, air-conditioning and ventilation arrangements so the completed space can support its intended function.
Typical scope: lighting layouts, power outlets, cable routing, air-conditioning provisions, ventilation interfaces and service access.
Final equipment capacities, electrical loads, cable sizes and ventilation rates require project-specific design and approval.
03 / Fit-Out for Different Environments
Workspaces, meeting rooms, reception areas and supporting office facilities, configured around circulation, functionality and interior finishes.
Interior arrangements for industrial offices, control rooms and technical spaces, subject to equipment layouts and applicable project requirements.
Fit-out configurations for porta cabins, modular offices and site facilities, including finishes and service provisions as specified.
Interior layouts for accommodation and supporting spaces, with materials and amenities selected for the required occupancy and use.
04 / Technical Specifications
This is a general specification guide, not a fixed product datasheet. In fit-out, exact thickness, ratings, capacities and material grades are determined from approved drawings, manufacturer datasheets and project requirements.
| Element | Technical specification / selection requirement |
|---|---|
| Partition system | Gypsum-board, glazed or modular partition as specified |
| Partition thickness | In accordance with the approved assembly and manufacturer details |
| Fire-rated partitions | Required rating supported by complete tested assembly documentation |
| Glazing | Glass type, thickness and safety classification to be confirmed |
| Doors | Material, dimensions, hardware and required fire rating as specified |
| Ceiling system | Suspended, gypsum-board or acoustic system as approved |
| Ceiling performance | Fire, acoustic, moisture and access requirements to be confirmed |
| Flooring | Vinyl, carpet tile, ceramic tile, epoxy or other approved finish |
| Flooring performance | Load, slip resistance, chemical resistance and substrate compatibility to be verified |
| Wall finishes | Paint, decorative panels or other specified finish |
| Lighting | Fixture type, layout, illuminance and emergency-lighting requirements to be confirmed |
| Electrical | Supply voltage, connected load, distribution and protection per approved design |
| HVAC | Cooling load, ventilation, controls and equipment selection per project design |
| Acoustic performance | Required rating and supporting test documentation where specified |
| Wet-area finishes | Moisture-resistant materials and waterproofing details as required |
| Fire stopping | Approved systems for relevant service penetrations and joints |
| Inspection & handover | Applicable inspection records, test results and as-built documentation |
Important: “Fire-rated gypsum board” and “fire-rated partition” are not the same thing. Required fire resistance must be demonstrated for the complete wall or ceiling assembly, including its framing, boards, joints and relevant penetrations.
05 / Project Standards & Compliance
Fit-out materials and installations should be selected against the approved design, applicable UAE requirements, building management conditions and the relevant authority approvals.
Fire-rated assemblies, exit routes, emergency lighting and fire-system interfaces must match the applicable project and authority requirements.
Occupancy, room use and mechanical design determine the required ventilation and air-conditioning arrangements.
Electrical distribution, protection, earthing and installation details require an approved design and applicable inspections.
Submit the relevant product datasheets, test reports and certificates where required by the specification.
06 / Our Project Approach
Review the space, intended use, drawings, material requirements and site constraints.
Define the proposed finishes, partition systems, services and project-specific specifications.
Coordinate the approved fit-out scope with site access, service interfaces and the project programme.
Complete the required checks and provide applicable project documentation.
07 / Technical Enquiry
Share your layout, intended use, project location and technical requirements with Dar Almahireen Technical Services L.L.C. We can review the requested scope and discuss a suitable fit-out solution.
